Master Battery
DLM Module
Generac Digital Load Management (DLM) Module for use with Generac Nexus Smart Transfer Switches
Add addtional individual DLM modules and manage up to four more large 240V loads, when used with in conjunction with the Generac Nexus Smart Switches (100-400 Amps). These modules are 50 amps each and are housed in a Nema 3R enclosure, giving the installer the option to install them either at the electrical panel or anywhere in-line indoors or outdoors between the
electrical panel and the appliance. After the four loads are shed they are brought back individually to assure generator capability and eliminate the potential of overload.
How It Works with the Generac Nexus Smart Switch:
1. By monitoring generator engine performance, the switch is able to identify when the generator approaches overload. At the appropriate time, the switch disconnects two air conditioners, typically the highest electrical load in the house.
2. After a 5-minute delay to allow for compressor bleed out, the switch brings the AC units back online one after the other with a 30-second delay in between. This is a standard capability in all Generac Smart Switches and does not require any additional components, unlike competitive transfer switches.
3. In addition, up to four other large 240V loads can be managed when the Smart Switch is used in conjunction with individual DLM modules.
• DLM modules are 50 Amps each and are housed in a NEMA 3R enclosure, giving the installer the option to install them either at the electrical panel or anywhere in-line indoors or outdoors between the electrical panel and the appliance.
• After the four loads are shed, they are brought back individually to assure DLM Module generator capability and eliminate the potential of overload.
Add addtional individual DLM modules and manage up to four more large 240V loads, when used with in conjunction with the Generac Nexus Smart Switches (100-400 Amps). These modules are 50 amps each and are housed in a Nema 3R enclosure, giving the installer the option to install them either at the electrical panel or anywhere in-line indoors or outdoors between the
electrical panel and the appliance. After the four loads are shed they are brought back individually to assure generator capability and eliminate the potential of overload.
How It Works with the Generac Nexus Smart Switch:
1. By monitoring generator engine performance, the switch is able to identify when the generator approaches overload. At the appropriate time, the switch disconnects two air conditioners, typically the highest electrical load in the house.
2. After a 5-minute delay to allow for compressor bleed out, the switch brings the AC units back online one after the other with a 30-second delay in between. This is a standard capability in all Generac Smart Switches and does not require any additional components, unlike competitive transfer switches.
3. In addition, up to four other large 240V loads can be managed when the Smart Switch is used in conjunction with individual DLM modules.
• DLM modules are 50 Amps each and are housed in a NEMA 3R enclosure, giving the installer the option to install them either at the electrical panel or anywhere in-line indoors or outdoors between the electrical panel and the appliance.
• After the four loads are shed, they are brought back individually to assure DLM Module generator capability and eliminate the potential of overload.
Generator cabinet base facia
Generac Fascia for Generac Guardian Air Cooled Generators (8-17kW Steel)
The fascia base wrap snaps together around the bottom the new air cooled generators. This offers a sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base. Kit Includes Skirt Pieces & Instructions.
Please note that this wrap only fits air-cooled generators manufactured after 4/2008 that have the contoured body wrap style. This Fascia is Bisque to match the 5870, 5871, 5872, 5873, 5882, 5883, 5884, 5885.
The fascia base wrap snaps together around the bottom the new air cooled generators. This offers a sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base. Kit Includes Skirt Pieces & Instructions.
Please note that this wrap only fits air-cooled generators manufactured after 4/2008 that have the contoured body wrap style. This Fascia is Bisque to match the 5870, 5871, 5872, 5873, 5882, 5883, 5884, 5885.
Base Plug
Generac Maintenance Kit
This maintenance kit offers all the items necessary to perform complete
maintenance on your Generac automatic home-standby generator. Generac
recommends performing maintenance once per year - more frequently if running
in a dusty environment. OEM parts and accessories provide the best results.
maintenance on your Generac automatic home-standby generator. Generac
recommends performing maintenance once per year - more frequently if running
in a dusty environment. OEM parts and accessories provide the best results.
Paint Chips touch up kit
Includes:
Touch Up Bottle, Touch Up Spray Can, and Towel
Touch Up Bottle, Touch Up Spray Can, and Towel
Auxillay Transfer switch contact kit
Guardian Auxilary Transfer Switch Contact Kit p/n 5621 The auxilary transfer switch contact kit allows a single large electrical load to be locked
out from the generator operation. If a home is equipped with electrical heat or multiple central air conditioning units, this device allows the generator
transfer switch to interrupt the control wire, breaking the signal needed for the appliance to turn on. Installation Information Once installed, the
control wire must be run from the appliance to the transfer switch to connect to the contact.
out from the generator operation. If a home is equipped with electrical heat or multiple central air conditioning units, this device allows the generator
transfer switch to interrupt the control wire, breaking the signal needed for the appliance to turn on. Installation Information Once installed, the
control wire must be run from the appliance to the transfer switch to connect to the contact.
Basic Wireless Electricity Monitor
Please download the PDF Brochure below.
Generac Nexus Wireless Monitor - Basic Provides truly wireless in-home generator status. Battery operated. This system is compatible with
air-cooled and liquid-cooled models that utilize the Nexus digital control panel, as well as air-cooled product that utilizes a 2008 or newer LCD style controller. It is not compatible with all liquid-cooled models or non-Nexus 8kW models.
Liquid-cooled models require adapter kit p/n 5958 sold seperately.
Features:
• Compact, sleek design
• Magnetic back for refrigerator mounting
• Red, yellow and green status indicator LEDs
Red LED 'Alarm' light is on when the generator is OFF or a fault is detected.
Yellow LED 'Maintenance' light, refer to owner's manual.
Green LED 'Ready' light is on when utility is present and switch is
in AUTO indicating the generator is ready and when generator is running.
• "Chirp" function to alert owners when the generator needs attention
• Area for dealer contact information on the rear panel
• Tooless battery cover for easy battery replacement
Generac Nexus Wireless Monitor - Basic Provides truly wireless in-home generator status. Battery operated. This system is compatible with
air-cooled and liquid-cooled models that utilize the Nexus digital control panel, as well as air-cooled product that utilizes a 2008 or newer LCD style controller. It is not compatible with all liquid-cooled models or non-Nexus 8kW models.
Liquid-cooled models require adapter kit p/n 5958 sold seperately.
Features:
• Compact, sleek design
• Magnetic back for refrigerator mounting
• Red, yellow and green status indicator LEDs
Red LED 'Alarm' light is on when the generator is OFF or a fault is detected.
Yellow LED 'Maintenance' light, refer to owner's manual.
Green LED 'Ready' light is on when utility is present and switch is
in AUTO indicating the generator is ready and when generator is running.
• "Chirp" function to alert owners when the generator needs attention
• Area for dealer contact information on the rear panel
• Tooless battery cover for easy battery replacement
Nexus Advanced Wireless Monitor
The Nexus Wireless Monitor - Advanced provides remote monitoring capability for convenient indoor observation. A generator owner can observe generator function, set certain operation perameters and receive maintenance reminders. This system is only compatible with air-cooled and liquid-cooled models that utilize the Nexus digital control panel. Liquid-cooled models require adapter kit p/n 5959 sold seperately.
Features:
• Sleek ergonomic case design
• Advanced membrane keypad
• Orange alert LED
• Backlit screen for easy viewing
• Desk or wall mountable cradle
• Permanent time/date stamped history of generator alarms
• Display generator faults and warnings
• Allows for remote testing of generator start and transfer functions
• Remote setting of exercise time and day
• Offers the ability to monitor utility voltage
• Graphing capability for trending of engine RPM, Utility Voltage and Battery Voltage
Includes:
• Wireless transmitter
• Wire harness connection
• Remote
monitor display unit
• Desk mount/wall mount cradle
• 120V AC plug and 3
AAA batteries
Features:
• Sleek ergonomic case design
• Advanced membrane keypad
• Orange alert LED
• Backlit screen for easy viewing
• Desk or wall mountable cradle
• Permanent time/date stamped history of generator alarms
• Display generator faults and warnings
• Allows for remote testing of generator start and transfer functions
• Remote setting of exercise time and day
• Offers the ability to monitor utility voltage
• Graphing capability for trending of engine RPM, Utility Voltage and Battery Voltage
Includes:
• Wireless transmitter
• Wire harness connection
• Remote
monitor display unit
• Desk mount/wall mount cradle
• 120V AC plug and 3
AAA batteries
